search

Alarm SAF RMBE Series Manual de instrucciones Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 13
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
Warnings and Notices
APPENDIX A: FAI INPUT CONNECTION METHODS
AlarmSaf, Inc. 65A Industrial Way, Wilmington, MA 01887 978-658-6717 www.alarmsaf.com
10
The RMDC series can be ordered with an optional FAI input to
disable the power to selected outputs upon activation of the FAI
input. The FAI input may be wired to latch if required by local
codes and accepts a 9–30V DC voltage, NO/NC contact or open
collector for activation.
These diagrams show various wiring methods. Be sure all
internal jumpers are set properly.
RMDC Series Installation Instructions 52-376 Rev B01
– +
SYSTEM
DC
– +
FAI
DC
L V+ B A
FAI INPUT
TERMINAL BLOCK 1
REMOTE NO DRY CONTACT
+9 to 30VDC
–VDC
– +
SYSTEM
DC
– +
FAI
DC
L V+ B A
FAI INPUT
TERMINAL BLOCK 1
+9 to 30VDC
–VDC
– +
SYSTEM
DC
– +
FAI
DC
L V+ B A
FAI INPUT
TERMINAL BLOCK 1
REMOTE NC
DRY CONTACT
– +
SYSTEM
DC
– +
FAI
DC
L V+ B A
FAI INPUT
TERMINAL BLOCK 1
REMOTE NO
DRY CONTACT
REMOTE NC
RESET SWITCH
– +
SYSTEM
DC
– +
FAI
DC
L V+ B A
FAI INPUT
TERMINAL BLOCK 1
REMOTE NO
DRY CONTACT
– +
SYSTEM
DC
– +
FAI
DC
L V+ B A
FAI INPUT
TERMINAL BLOCK 1
REMOTE NO
DRY CONTACT
REMOTE NO
DRY CONTACT
Remote normally open,
dry contact trip using
external voltage source
with common return to
the FAIM. Internal FAI
mode jumper (J1) must
be set to the right.
Remote normally open,
dry contact or open
collector trip using the
internal voltage source of
the FAIM. Internal FAI
mode jumper (J1) must
be set to the right.
Remote normally closed,
dry contact trip using the
internal voltage source of
the FAIM. Internal FAI
mode jumper (J1) must
be set to the right.
Remote normally open,
dry contact or open
collector trip using the
internal voltage source of
the FAIM with latch
function Remote reset
switch is used to unlatch
FAI condition after system
alarm is restored to
normal supervisory
condition. Internal FAI
mode jumper (J1) must
be set to the right.
Remote normally open,
dry contact or open
collector trip using the
internal voltage source of
the FAIM. Internal FAI
mode jumper (J1) must
be set to the right.
Remote normally open,
dry contact trip using the
internal voltage source of
the FAIM. Internal FAI
mode jumper (J1) must
be set to the right.
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Cajas eléctricas Alarm SAF RMBE Series
Cajas eléctricas Alarm SAF RMBE Series Manual de instrucciones   (20 paginas)
Cajas eléctricas Alarm SAF RMBE Series Manual de instrucciones   (14 paginas)
Cajas eléctricas Alarm SAF RMBE Series Manual de usuario   (20 paginas)
  • FUSION Electronics TrueAir Vuezone COSMOGAS Voipac
  • Philips Reproductores de dvd Apple Proyectores de datos Poulan Edgers Asus Proyectores de datos Learning Resources No
  • Samsung Sunburst Robertshaw 9520 Korg TRITON Extreme music workstation/sampler Kawasaki 840781 Mio A702
  • Electrolux EDH3686GDE Manual de usuario Char-broil RED 463250811 Manual de usuario Jbl Synthesis S4S Manual de usuario PROCEED AMP3 Manual de usuario LG CM4360 Manual de usuario